Ten categories
Handle common daily measurements and technical conversions without switching tools.
Convert length, mass, temperature, area, volume, speed, pressure, energy, data and time across 71 units, and see your value in every unit of the category at once. Factors follow exact definitions, such as 1 inch = 2.54 cm and 1 pound = 0.45359237 kg, and °F = °C × 9/5 + 32. Runs in your browser.
Distance and dimensions
One input, every compatible result
Choose the quantity you are working with, enter a value, and move cleanly between metric, US customary, binary, and technical units.
Choose one of ten tabs: length, mass, temperature, area, volume, speed, pressure, energy, data or time. Each opens on a common pair, such as metres to feet or Celsius to Fahrenheit.
Type any number, negative or decimal, with a point or a comma for decimals: 1.5 and 1,5 both mean one and a half, and 1,500 is fifteen hundred. Choose the From and To units, or press the swap button to reverse them.
Drag the slider from 0 to 8 decimal places. Results of a trillion (10^12) or more, or smaller than 0.000001, switch to scientific notation.
Click the result to copy it with its unit symbol, or use the table below, which converts your value into every unit in the category. Click any row to copy it.
Handle common daily measurements and technical conversions without switching tools.
Choose from zero to eight decimal places, with scientific notation when a result is extremely small or large.
See one input converted to every compatible unit and copy any result directly.
One metre is about 3.2808 feet, because a foot is defined as exactly 0.3048 metres. To convert metres to feet, divide by 0.3048; to convert feet to metres, multiply by 0.3048. The converter opens on this pair, and the table shows the same length in inches, yards, miles and the other length units.
Multiply by 9/5 and add 32: 20 °C × 9/5 + 32 = 68 °F. To go back, subtract 32 and multiply by 5/9. Kelvin is Celsius plus 273.15. Temperature uses these offset formulas instead of a single factor because the scales start at different zero points.
One kilogram is about 2.2046 pounds. The pound is defined as exactly 0.45359237 kg, and the converter uses that figure, so 70 kg is about 154.3236 lb. An ounce is 1/16 of a pound (28.349523125 g) and a stone is 14 pounds (6.35029318 kg).
A megabyte (MB) is 1,000,000 bytes; a mebibyte (MiB) is 1,048,576 bytes, or 1,024 × 1,024. Drive makers use decimal units, while some operating systems count in binary units, which is why a 500 GB drive can appear as about 465.66 GiB. The Data tab covers bits, bytes, KB to TB and KiB to GiB.
No. The US gallon used here is exactly 3.785411784 litres, while the imperial gallon used in the UK is 4.54609 litres, about 20% larger. This converter includes only US liquid units (teaspoon, tablespoon, fluid ounce, cup, pint, quart and gallon), each labelled US. For imperial measures, multiply imperial gallons by 4.54609 to get litres first.
Divide kilojoules by 4.184 to get kilocalories, the Calories shown on food labels: 840 kJ is about 200.76 kcal. The Energy tab opens on this pair. A small calorie (cal) is 1/1,000 of a kilocalorie, so check which one a label means before converting.
Results are rounded only for display, to the 0 to 8 decimal places you choose, so raise the precision to see more digits. Definitions also vary between tools. Here a calorie is 4.184 J, a BTU is 1,055.05585262 J, a knot is 1,852 m per hour, and a year is the mean Gregorian year of 365.2425 days.
Explore the growing collection for calculations, documents, writing, and everyday work.